Vocia VA-4030e

The VA-4030e is a digital networked four-channel amplifier for use in Vocia systems. It is capable of delivering continuous audio power at 30 Watts RMS per channel. The VA-4030e is CobraNet® enabled for audio and control with dynamic use of bundles. It has local analog inputs and dual power supply. Two RJ-45 connectors on the rear panel provide redundant CobraNet connectivity to the Vocia network. The  on-board DSP provides comprehensive fixed-chain, digital signal processing within the device. In addition, emergency messages are stored in local non-volatile memory. Page active relay outputs provide a contact  closure per channel when paging is active on the channel. The amplifier offers low impedance and constant voltage outputs. The VA-4030e also has comprehensive failover capability with device-to-device, all-to-one, and channel-to-channel failover.

  • Four channels of 30W RMS per channel
  • Transformer coupled outputs, low impedance (4 or 8Ω) or 25V, 70V or 100V (hardware selectable)
  • Comprehensive failover
  • Device-to-device
  • All-to-1 channel
  • 1:1 channel
  • Supports Page Active Relay (PAR), ELD-1, and ANC-1
  • Local non-volatile storage of emergency messages
  • Ground fault detection
  • Software-configurable signal processing including volume control, filters, compressor/limiting, delay, speaker equalization, and output sensitivity
  • CobraNet audio/control with dynamic use of available bundles
  • LED status and signal indication
  • Ground fault detection
  • Local background source support with single mic/line analog audio input for each channel (gain adjustable, switchable phantom power)
  • Dual power supply
    • AC Mains
    • Single or Dual 24V DC inputs
  • Dual Ethernet ports for redundancy
  • Rotary switches for device identification
  • Rack mountable (2RU)
  • EN 54-16 certified, CE marked, UL listed and RoHS compliant
  • Covered by Biamp Systems’ 5-year warranty
Case Studies